You are not logged in.

  • Register to access all forum features  

#1

BradCorrie
Member
Joined: 09 July 2018
Posts: 57
Member
23 July 2018 02:29 pm

Finally got my highbanker.. now to find a pump and test it out.

1532316570_20180723_124056_resized.jpg

1532316588_20180723_124115_resized.jpg

8 users like this post: Rusty_G, 7.62marksman, mudgee hunter, aussiefarmer, Bluecurrant, Mackka, Goldfreak, goody2shoes

#2

Rusty_G
Member
Joined: 27 January 2016
Posts: 189
Member
23 July 2018 04:01 pm

Nice Banker mate. Pump options on a wider banker are pretty much 2" or a Honda 1.5" with proline pump housing...GoldRat has this...all cheap china 1.5" pumps don't flow enough water to feed the wider bankers. It might be a good idea also to put some sort of mesh up the top to allow for better washing action...I'm sure you already have a few modifications in mind! smile thumbsup
All the best and keep us posted on its first run! cool

#3

BradCorrie
Member
Joined: 09 July 2018
Posts: 57
Member
23 July 2018 04:13 pm

Legend. Thanks Rusty.. i hadnt thought of the mesh on top.. im new to all this so thanks for the tips. So im guessing a 6059 litre per hour pump wont be suitable?

#4

Dragon Man
Member
From: SouthWestern Victoria, VIC
Joined: 06 August 2017
Posts: 84
Member
23 July 2018 04:35 pm

Looks good. Even has a deadening pool area.

What brand is it?


Ken - SouthWestern Victoria
Home made Rocker Box, Gold Rat 12" Highbanker, and a few assorted Pans, shovels, scoops, classifiers, etc, etc. Keep your Sluice in the Juice!

#5

Rusty_G
Member
Joined: 27 January 2016
Posts: 189
Member
23 July 2018 04:52 pm

No worries, its good to be helpful, Iv'e received tons of advice on all sorts of prospecting related stuff here on PA..so just passing it on.
Unfortunetly I don't think 6059 LPH would be enough water flow...if that was the pump maxed out. Better to have a bigger pump with plenty of pressure to bust up clay (Gold loves to stick in clay) that runs at lower rpm thus saving your ears a bit of pain.
The only problem with bigger pumps is moving them. If you don't plan on going way up some creek though, your laughing...providing theres Gold. big_smile
It's also important that there is enough water flow to ensure a good exchange (heavies come in, lights go out) of materials on your mat.

#6

BradCorrie
Member
Joined: 09 July 2018
Posts: 57
Member
23 July 2018 04:57 pm

Dragon Man wrote:

Looks good. Even has a deadening pool area.

What brand is it?

Its a home made job Dragon man. A fella in NSW makes them for $250.

Last edited by BradCorrie (23 July 2018 04:58 pm)

1 user likes this post: Matt80

#7

BradCorrie
Member
Joined: 09 July 2018
Posts: 57
Member
23 July 2018 04:59 pm

Rusty_G wrote:

No worries, its good to be helpful, Iv'e received tons of advice on all sorts of prospecting related stuff here on PA..so just passing it on.
Unfortunetly I don't think 6059 LPH would be enough water flow...if that was the pump maxed out. Better to have a bigger pump with plenty of pressure to bust up clay (Gold loves to stick in clay) that runs at lower rpm thus saving your ears a bit of pain.
The only problem with bigger pumps is moving them. If you don't plan on going way up some creek though, your laughing...providing theres Gold. big_smile
It's also important that there is enough water flow to ensure a good exchange (heavies come in, lights go out) of materials on your mat.

No worries, most on my work is in running creeks but will look at a bigger pump for more flow. Thanks again mate

#8

G0lddigg@
Member
From: Brisbane, QLD
Joined: 03 April 2013
Posts: 4,929
Member
10 August 2018 09:15 am

nice one of Trevs bankers hes top bloke smile


*The real Gold is the Journey and the friends we make
Engineering Gold Sluices and Highbankers

#9

Tim_the_Adventurer
Newbie
Joined: 18 June 2018
Posts: 2
Newbie
10 October 2018 09:42 pm

Hey Brad Corrie, do you have any contact info for the guy thats makes these? i work and live in cobar.

#10

7.62marksman
Member
From: Nowra, NSW
Joined: 26 July 2016
Posts: 5,714
Member
10 October 2018 09:46 pm

Tim_the_Adventurer wrote:

Hey Brad Corrie, do you have any contact info for the guy thats makes these? i work and live in cobar.

just a question how often do you get to use it out there


Highbanker, Sluice, Trommel, Gold Monster 1000 (Khaleesi), Garrett Ace 400i (Rhaegal), Go-Find 40 (Nymeria), Non Turbo 2.8lt Hilux (Turtle), NAPFA member ----A disposal technician at a dead run outranks everybody

#11

Goldfreak
Member
Joined: 13 May 2017
Posts: 810
Member
10 October 2018 09:53 pm

Hope you are not trying to make him say he uses it were he is not meant to 7.62 ?

#12

7.62marksman
Member
From: Nowra, NSW
Joined: 26 July 2016
Posts: 5,714
Member
10 October 2018 10:01 pm

ops who me would i do that playful angel angel


Highbanker, Sluice, Trommel, Gold Monster 1000 (Khaleesi), Garrett Ace 400i (Rhaegal), Go-Find 40 (Nymeria), Non Turbo 2.8lt Hilux (Turtle), NAPFA member ----A disposal technician at a dead run outranks everybody

1 user likes this post: mudgee hunter

#13

Goldfreak
Member
Joined: 13 May 2017
Posts: 810
Member
10 October 2018 10:05 pm

In regards to small Chinese pumps on highbankers. Just a question, why dont they make high bankers longer but more narrow to compensate for the low flow 12v bilge pumps ? Must be a reason I dont understand.

1 user likes this post: mudgee hunter

#14

Goldfreak
Member
Joined: 13 May 2017
Posts: 810
Member
10 October 2018 10:42 pm

Congrats on your high banker Brad. Looks like a nice little unit.

#15

G0lddigg@
Member
From: Brisbane, QLD
Joined: 03 April 2013
Posts: 4,929
Member
11 October 2018 08:52 am

Tim_the_Adventurer wrote:

Hey Brad Corrie, do you have any contact info for the guy thats makes these? i work and live in cobar.

shoot me a message tim i can get your trevs number


*The real Gold is the Journey and the friends we make
Engineering Gold Sluices and Highbankers


Contact Us - Privacy Policy - Terms Of Service

View Desktop Site

Top