You are not logged in.
Blackgreg
Newbie
Hi I got a old whites coinmaster 5000d series 3 and can not decide what voltage it is is it 12 or 6 volt it has 4 x d size nicada But the charger that it came with is 12 volt 4 x d would 6 volt. The nicads are stuffed and I need to make a battery pack
The confusion is the downloads I have got say it is 12 volt but the battery back only takes 4 x d cells
Ca any body help.
Greg
grubstake
Member
It sounds like somebody has substituted a single D-cell battery pack for the correct AA battery packs. According to the Coinmaster 5000D Series 2 manual, there should be two battery packs: a black one with 6x 1.5V (9V total) and a white one with 8x 1.5V (12V total):
Where it is, there it is.
Blackgreg
Newbie
Hi I have now found the link but can not post it yet, i have not made the required number of posts to do so, i will post it when can. Thanks grubstake for your repl
greg
grubstake
Member
Whites' archives don't show a Series 3 model for the 5000D, only a Series 2. Is the meter on your machine mounted on the detector box, or is it fixed to the end of the handle?
Where it is, there it is.
nesral
Member
.
.
Whites (Blue Box) Coinmaster 5000/D Series 3, use a white closed battery box for 4 C cells.
Blackgreg
Newbie
/hi thank guys i is 6 volt 4 x D nicads, i have found a manual on line 
/2n8l501nj5nyy72iq1aeel55-wpengine.netdna-ssl.com/wp-content/uploads/2016/07/cm_6000_d_5000_d_s3_instruction_manual.pdf cut and paste into your browser
thanks for your help guys problem now sorted
greg
Last edited by Blackgreg (02 January 2019 12:14 pm)
Register
Login