You are not logged in.

  • Register to access all forum features  

#1

Jack's Gems
Member
Joined: 19 June 2016
Posts: 61
Member
10 October 2017 04:35 pm

Does anyone have 64 index wheel designs? My new (old) machine has a 64 index wheel on it and have 1 design for a simple brilliant. This is definitely going to be a change to use a 64, not a 96.

Also, the one design I have starts at the table and ends at the pavilion mains. neutral

Thanks - Jack

#2

SneakyCuttlefish
Member
Joined: 24 June 2014
Posts: 179
Member
11 October 2017 05:54 pm

HI Jack

  • go to http://www.facetdiagrams.org/

  • click the search button

  • select shape from drop down menu

  • select index wheel from drop down menu

  • tick the box for "show open designs only"

  • Click "I agree Search"

You will have access to hundreds of facet diagrams. Study them closely before attempting. Some are a bit hows-yah-mum. Most of the time they are good. Even better if you have GemCad and GemRay. That way you can adapt designs easily for other materials. Some of the files don't load clean into GemCad. You may have to rebuild them.

1 user likes this post: aussiefarmer

#3

Jack's Gems
Member
Joined: 19 June 2016
Posts: 61
Member
12 October 2017 05:34 pm

Thanks, Sneaky! I have used that site many times for their diagrams. I guess I could use GemCAD to create some new designs. I am a beginner smile thumbsup


Contact Us - Privacy Policy - Terms Of Service

View Desktop Site

Top