Forums
New posts
Search forums
What's new
New posts
Latest activity
Members
Registered members
Current visitors
Charts
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Metal Detectors
Whites
WHITES GMT Goldmaster information and questions
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Prospecting Australia:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="Guest" data-source="post: 31373"><p>I'm not sure what's working for everyone else but I turn the SAT speed to 10,gain highest possible around 7-8 and then start backing the SAT speed back before it overloads . Then ground balance , set the theshold. Once you have started detecting you may have to speed up the SAT speed a little . I always hunt in AUTO TRAC and without boost on.</p><p>If you can't ground balance start backing off the gain but not below 5</p><p> Iv got heaps of 0.02 flakes running these settings my test piece is 0.02 and air tests 1.5"</p><p>With 4x6 shooter coil </p><p> Just remember some ground isn't ment for VLF detectors but sometimes you only have to work tailings piles or move 20m away and the ground can be alright.</p><p> I also check unfilled detector holes and scan as I fill them in and find little surprises !</p></blockquote><p></p>
[QUOTE="Guest, post: 31373"] I'm not sure what's working for everyone else but I turn the SAT speed to 10,gain highest possible around 7-8 and then start backing the SAT speed back before it overloads . Then ground balance , set the theshold. Once you have started detecting you may have to speed up the SAT speed a little . I always hunt in AUTO TRAC and without boost on. If you can't ground balance start backing off the gain but not below 5 Iv got heaps of 0.02 flakes running these settings my test piece is 0.02 and air tests 1.5" With 4x6 shooter coil Just remember some ground isn't ment for VLF detectors but sometimes you only have to work tailings piles or move 20m away and the ground can be alright. I also check unfilled detector holes and scan as I fill them in and find little surprises ! [/QUOTE]
Verification
Post reply
Metal Detectors
Whites
WHITES GMT Goldmaster information and questions
Top