Forums
New posts
Search forums
What's new
New posts
Latest activity
Members
Registered members
Current visitors
Charts
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Metal Detectors
Detector Accessories
Nexus 30" and 21" Concentric Coils For Minelab GPX
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Prospecting Australia:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="washgravel" data-source="post: 513935" data-attributes="member: 3102"><p>After reading Hermann's results in the Detech CC coil discussion in regards to the Nexus 21" CC coil I thought I should ask my questions here since this is related to the Nexus 21"CC coil. </p><p></p><p>As Hermann mentioned for his test with the 21" CC coil on his 5000, when it was set in Normal (timing) and the coil switch set in Maximum Depth, he could not detect the surrounding area as the detector was too noisy and I expect <u><strong>also</strong></u> due to the detector's Coil/Rx position set in Mono? </p><p></p><p>He also mentioned the coil works in Cancel and DD so does either with the detector set in Normal and the coil switch still set in Maximum Depth continue to be too noisy over the surrounding area? </p><p></p><p>And when he flicked the coil switch to the Hot Ground position the detector became very stable and could still hear the 58g target at 45cm, however could he still detect the surrounding area with the Coil/Rx position still set in <u>Mono</u>? </p><p></p><p>Also could either or both Cancel and DD hear the 58g at 45cm as loud and clear as Mono with the coil switch set in the Hot Ground position?</p></blockquote><p></p>
[QUOTE="washgravel, post: 513935, member: 3102"] After reading Hermann's results in the Detech CC coil discussion in regards to the Nexus 21" CC coil I thought I should ask my questions here since this is related to the Nexus 21"CC coil. As Hermann mentioned for his test with the 21" CC coil on his 5000, when it was set in Normal (timing) and the coil switch set in Maximum Depth, he could not detect the surrounding area as the detector was too noisy and I expect [u][b]also[/b][/u] due to the detector's Coil/Rx position set in Mono? He also mentioned the coil works in Cancel and DD so does either with the detector set in Normal and the coil switch still set in Maximum Depth continue to be too noisy over the surrounding area? And when he flicked the coil switch to the Hot Ground position the detector became very stable and could still hear the 58g target at 45cm, however could he still detect the surrounding area with the Coil/Rx position still set in [u]Mono[/u]? Also could either or both Cancel and DD hear the 58g at 45cm as loud and clear as Mono with the coil switch set in the Hot Ground position? [/QUOTE]
Verification
Post reply
Metal Detectors
Detector Accessories
Nexus 30" and 21" Concentric Coils For Minelab GPX
Top