Forums
New posts
Search forums
What's new
New posts
Latest activity
Members
Registered members
Current visitors
Charts
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Metal Detectors
Minelab
Minelab SDC2300 information and questions
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Prospecting Australia:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="mbasko" data-source="post: 292317" data-attributes="member: 4485"><p>Found it. Further to above from the supplied SDC2300 charger (enecharger NC1500U) specs/instructions:</p><p>"Built in safety timer - For the 4 main slots (not 9V) if charging is still taking place after 3 hours the safety timer will cut out the fast charge and the charging current will drop to trickle charge rate. For high capacity batteries (higher than 4.4Ah) the charger will need to be reset (turned off then back on again after 3 hours) for fast charging to resume"</p><p>This is likely why some people are having issues with short battery life etc. from this charger.</p><p>To get a full recharge you would need to reset the charger as per above as the batteries supplied are 5000mAh (5Ah).</p><p>I knew I'd seen it somewhere but as I used a different 8 bank smart charger I never had this issue myself. I'll sleep better tonight now <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite8" alt=":D" title="Big Grin :D" loading="lazy" data-shortname=":D" /></p></blockquote><p></p>
[QUOTE="mbasko, post: 292317, member: 4485"] Found it. Further to above from the supplied SDC2300 charger (enecharger NC1500U) specs/instructions: "Built in safety timer - For the 4 main slots (not 9V) if charging is still taking place after 3 hours the safety timer will cut out the fast charge and the charging current will drop to trickle charge rate. For high capacity batteries (higher than 4.4Ah) the charger will need to be reset (turned off then back on again after 3 hours) for fast charging to resume" This is likely why some people are having issues with short battery life etc. from this charger. To get a full recharge you would need to reset the charger as per above as the batteries supplied are 5000mAh (5Ah). I knew I'd seen it somewhere but as I used a different 8 bank smart charger I never had this issue myself. I'll sleep better tonight now :D [/QUOTE]
Verification
Post reply
Metal Detectors
Minelab
Minelab SDC2300 information and questions
Top