You are not logged in.

  • Register to access all forum features  

#76

Lesgold
Member
From: South Coast, NSW
Joined: 12 April 2017
Posts: 766
Member
03 May 2021 09:29 am

Hi Folks
Finally got a chance to try the Zed Search in WA. Spent a couple of days on a mates lease in Coolgardie for just a few pieces. In that area, the coil ran well and was quite stable. Sensitivity was up around 17. (High Yield/ Difficult). On a couple of the warmer days, sensitivity had to be dropped back a bit as the ground warmed up.

Spent ten days on a tag along on a large lease around Laverton. Sensitivity was on 20 for the whole trip. The coil loved hot rocks (as did the standard coil and SDC’s) but ran well on that setting. Didn’t find any “bragging gold” but enough scraps to keep me amused. The area we were in had been hit heavily over the years with large sections being pushed or mined. Most targets were shallow but occasionally pieces were pulled from considerable depth. The disappointing aspect of the deeper pieces was the size of the nuggets that were popping out. Still scratching my head as to how this coil could sniff out a tiny bit and tell me I needed to dig a well. I will post a pic of yesterday’s micro bits when the sun comes up.
Cheers

Les


GPZ 7000, SDC 2300, Equinox 800
Bullet and lead shot specialist.

5 users like this post: mbasko, davent, Syndyne, NUGS MONEY, grubstake

#77

Lesgold
Member
From: South Coast, NSW
Joined: 12 April 2017
Posts: 766
Member
03 May 2021 06:49 pm

Yesterday’s effort with the Zed Search. No size in any of them but you can only dig up what is there. The two pieces of calcrete have gold in them. The kinder surprises are for the grand kids to smash up. Just over 5 grams in total.
1620028143_1ab42faa-cff5-46a5-9d4e-cb401266913c.jpg


GPZ 7000, SDC 2300, Equinox 800
Bullet and lead shot specialist.

8 users like this post: OldGT, RM Outback, Rockhunter62, mbasko, A-team, NUGS MONEY, Mackka, grubstake

#78

davent
Member
Joined: 01 September 2015
Posts: 3,387
Member
Yesterday 01:13 pm

Anyone know if Rohan intends to make a bigger coil for the zed?

#79

A-team
Member
Joined: 08 July 2020
Posts: 257
Member
Today 12:56 pm

Had some correspondence in the past with him. He doesn't like to jump the gun and prefers to have the right information before progressing on a design. He said at the moment his concentrating on production of the 12 inch coils. He has no immediate intention of releasing another coil, but is considering the options. From what I hear, there is a bit of work in producing his high quality 7000 coils.


"Gold is learning how to hide better"
Equinox 600 - 2 x GPZ 7000s Nothing else needed...

#80

A-team
Member
Joined: 08 July 2020
Posts: 257
Member
Today 12:57 pm

davent wrote:

Anyone know if Rohan intends to make a bigger coil for the zed?

I know own 3 X-coils, and have never looked back!!! Fricken amazing thumbsup


"Gold is learning how to hide better"
Equinox 600 - 2 x GPZ 7000s Nothing else needed...

#81

Qlden
Member
Joined: 31 January 2014
Posts: 73
Member
Today 05:13 pm

Hey Dave.
Have sent you a message..


Gpz7000, Sdc2300, Gpx4500.

#82

davent
Member
Joined: 01 September 2015
Posts: 3,387
Member
Today 07:39 pm

I found the 12” NF pretty noisy and giving strong repeatable signals on hot ground. Dug about 6 holes , most about 4” when they disappeared but one about 8” that stayed strong but did not get louder before it moved around and disappeared too!
Knocked the sensitivity back. Was in HY difficult.
Anyone have any tips to tame it?
Did find 3 small bits later in the afternoon.


Top