You are not logged in.

  • Register to access all forum features  

#1

Pecky
Newbie
From: Perth, WA
Joined: 26 February 2021
Posts: 2
Newbie
04 April 2021 11:10 pm

G'day all,

I have a brand new SDC2300 and one of the things that I was concerned about was that it could fall over when put down on the ground.

I searched the forum and the internet for solutions but I didn't have enough time to order anything online before I was going out prospecting for the first time. So I decided to make something myself.
It is basically a 150mm spring clamp that I filed a square in the middle to fit the shaft on the detector. It was cheap, fairly light and easily removable.

1617537881_img_20210404_182659889.jpg

1617538153_img_20210404_182601278.jpg

Cheers,
Pecky

14 users like this post: aussiefarmer, 7.62marksman, Windar, Eldorado, Dave79, wiley coyote, woomera, Muk, vandemon, Banjo68, nesral, Caesar, Syndyne, dirtdiggin

#2

aussiefarmer
Member
Joined: 26 July 2015
Posts: 4,288
Member
04 April 2021 11:13 pm

Clever perfect , I find making the coil lay flat usually stops it tipping over.


Wish in one hand and poo in the other , See which one fills up first !

2 users like this post: goody2shoes, Syndyne

#3

Eldorado
Member
From: Goulburn, NSW
Joined: 21 July 2015
Posts: 1,640
Member
05 April 2021 12:26 am

Absolutely brilliant.


Top