You are not logged in.

  • Register to access all forum features  

#1

RockRat
Member
Joined: 26 May 2018
Posts: 369
Member
22 November 2020 06:26 pm

1606029948_img_2641.jpg1606027960_2.jpg1606027987_3.jpg1606029216_img_2646.jpg1606029285_img_2682.jpg1606029332_img_2683.jpg

Cleaned up well, thanks Ken, thumbsup

16 users like this post: aussiefarmer, Wishfull, RM Outback, 7.62marksman, mudgee hunter, mbasko, goody2shoes, Dihusky, Jaros, xcvator, silver, CreviceSucker, sand surfer, numpty, LoneWolf, ktmman

#2

7.62marksman
Member
From: On the road, NSW
Joined: 26 July 2016
Posts: 8,470
Member
22 November 2020 06:47 pm

You done good mate thumbsup


Confucius says Before you embark on a journey of revenge "Dig two graves"

1 user likes this post: GreenRiver

#3

Dihusky
Member
From: Gold Coast, QLD
Joined: 16 June 2017
Posts: 1,519
Member
22 November 2020 07:45 pm

Now we want to see some results RockRat

3 users like this post: goody2shoes, 7.62marksman, sand surfer

#4

RockRat
Member
Joined: 26 May 2018
Posts: 369
Member
22 November 2020 09:07 pm

Stay tuned , have got a few ideas, like reshaping some of the
larger water worn crystals i have found, i'll either stuff em or
they will look spectacular with a led light underneath them,
mounted on a carved bit of wood. Some I've found have
feldspar and iron inclusions which are highlighted with a beam
of light shining up through the bottom. I'll modify the one
with the arm on it and put on a larger diamond disk, see what
happens. Bearings on these machines have no movement,
over all there good Aussie made machines. gemstone
( just got Nonce error when i went to like comments,
consider them all liked)

6 users like this post: goody2shoes, Skip, 7.62marksman, xcvator, sand surfer, LoneWolf

Top