You are not logged in.

  • Register to access all forum features  

#1

10fp
Member
From: Adelaide
Joined: 16 December 2015
Posts: 146
Member

Sdc , 4500, NOX 800, QED

#2

Redfin
Member
Joined: 26 February 2013
Posts: 2,237
Member
14 April 2019 06:14 pm

A 1.5 kilo lump of lead as the target, he picks it up with the detector running ans passes it quite close to the coil, about 60cm, and
it didn't make a wimper??
A 4500 with a 14" coiltek elite would scream its head off.

1555226067_capture.jpg


Det used - Whites 6000D, ML SD2000, ML SD 2001, ML SD 2200D, Garrett Infinium. Minelab SDC 2300. Minelab GPZ 7000.
Current Det - Garrett ASD Groundhog. . Minelab GPX 5000. Minelab GPX 4500.

1 user likes this post: Ben Digo

#3

travelergold
Member
Joined: 19 May 2015
Posts: 174
Member
14 April 2019 06:47 pm

Looking at video, he did not swing coil very far either, only 10 inch or so. The coil was always over the target. No way in my opinion to detect or test. The coil has to pass properly past the target on both sides. I'm with you redfin, that target should have screamed and should be an easy find with most coils, even a stock 11" comander coil.

1 user likes this post: Ben Digo

#4

Jaros
Moderator
From: S.E.Qld., QLD
Joined: 11 August 2013
Posts: 10,442
Moderator
14 April 2019 06:53 pm

Redfin wrote:

A 1.5 kilo lump of lead as the target, he picks it up with the detector running ans passes it quite close to the coil, about 60cm, and
it didn't make a whimper??
A 4500 with a 14" coiltek elite would scream its head off.

https://www.prospectingaustralia.com.au … apture.jpg

I noticed that as well Redfin-what a load of crap.


F1A4M2, Exterra 705 Gold, Ace 250, Goldrat 8" Dreammat River Sluice.

2 users like this post: Ben Digo, Araratgold

Contact Us - Privacy Policy - Terms Of Service

View Desktop Site

Top