You are not logged in.

  • Register to access all forum features  

#1

Northeast
Member
Joined: 27 August 2016
Posts: 1,087
Member
12 January 2019 10:16 am

Hello all.

With the pending sale of the Z I am seriously looking at a QED as a lightweight PI that is at the price point for how much use I am likely to get out of my next 'gold' detector.

I am wondering if people would be happy to list the coils that they have actually used on a QED and how they felt about:

- its abilities in their given ground and what type of ground that was.

- issues or lack of with EMI.

- issues or lack of with ground balance.

- ergonomics/balance of the coil with weight, was a bungy required, etc.

I already have some particular coils in mind but would be interested to hear thoughts about others that I may not have considered. And hopefully this can also become a reference point for other QED users in the future.

Thanks, NE.

1 user likes this post: rockdev

#2

Reg Wilson
Member
Joined: 06 September 2017
Posts: 337
Member
12 January 2019 10:57 am

Favorite coils for QED. Small coils... Sadie, 8" Commander.
Medium coils...11" Elite, 14" Elite.
Large coils...18" Elite, 18" Detech, 25" Nuggetfinder, 38" John-hider Smith custom built coil.
I could probably cut this list down to the two most used coils which would be the 8" commander for tight or scrubby areas, and the 25" Nuggetfinder for open country.
The Elite coils are very good, but a little heavy, I guess due to more wire, and tend to be a bit noisier and less stable. The up side is that they are very sensitive and probably have a bit more punch than a bundle wound coil.
I have never had EMI problems with the QED and have found I can get very close to both buried cables and overhead power lines that sent my 7000 crazy.
Ground balance can at times be a bit finicky, but the areas that have given me trouble also caused problems with both my GPZ and GPX. I have actually found that having a manual ground balancing machine can be very handy in some problem areas, being able to eliminate many spurious signals.
Ergonomics.... Now this is where the QED really shines. It is super light and nicely balanced with almost any coil, not requiring a harness or bungy cord for all but the monster coil, for which I do use a bungy cord. You may require a bungy for the larger Elites, depending on your level of strength and fitness, but I do not use one for the 25" Nuggetfinder as it is surprisingly light.
I have been impressed right from the start as to how powerful this super compact detector is. Miniaturization at its best, with a battery life of about 8 hours, and rechargeable, of course.


Walmer Central Victoria
Began detecting 1979 Best colour 3Kgs Best patch 340 ozs.

4 users like this post: Northeast, Mirrors, rockdev, drbob

#3

Northeast
Member
Joined: 27 August 2016
Posts: 1,087
Member
12 January 2019 11:18 am

Thanks Reg, perfect start thumbsup

The 25" Nugget Finder was the larger coil that interested me most.

I know that there is a lot of information about coils for the QED, wireless units, speaker systems, etc on this forum already but it is spread across several threads and 60 pages with a lot of other irrelevant info mixed in. I hope these more specific threads help others to refine their search.

#4

egixe4
Member
Joined: 13 February 2018
Posts: 17
Member
12 January 2019 12:22 pm

I use the following on the QED

Small 8" Commander
Medium 14" Elite
Large 18" Nugget Finder Advantage

1 user likes this post: Northeast

#5

mbasko
Member
From: Central West NSW
Joined: 27 January 2015
Posts: 3,764
Member
12 January 2019 12:45 pm

Favourite coil was 11" Detech Ultra Mono. I found it a good allround coil that could match the 8" Commander mono for sensitivity. Found both my smallest & biggest bit with this coil on the QED & ran it in mode 3-4 mostly.
I only used the 8" Commander if detecting tighter areas.
The 8" Commander I had ran well but I couldn't replicate others who run them in mode 1 without a lot of ground noise/hot rocks. Was best for me at mode 3 >.
Also found the 16" Nugget Finder Advantage ran well on the QED. From most reports it appears that mid to large NFA coils all seem to run well on it.
No particular EMI issues with any specific coil just the norm when getting too close to other machines, when near some powerlines or approaching storms which occur with other detectors too.


Everything we use comes from mining or farming.

1 user likes this post: Northeast

#6

mbasko
Member
From: Central West NSW
Joined: 27 January 2015
Posts: 3,764
Member
13 January 2019 09:43 am

Just to add further:
The Detech 11" Ultra Sensing Mono is one of two coils offered as part of the QED PL2 package
http://www.detech-metaldetectorsaustral … te-package
You could get that as a starting point & see what you think. No real loss if you decide you don't like it - sell it on eBay etc.
I read somewhere that your mate has a GPX5000 - if you do get a QED then hit your mate up for a lend of his coil collection & try them out on the QED. Best way to find what will suit you/your area IMO.


Everything we use comes from mining or farming.

2 users like this post: Northeast, Cando

#7

Reg Wilson
Member
Joined: 06 September 2017
Posts: 337
Member
01 March 2019 04:10 pm

Just got some feedback on the 15x10 Detech coil that Stinky Pete is offering as an option on the QED package. A user reports that it is very stable over nasty ground and has surprising depth capabilities. He tested it against a friends QED, and said he was glad he took the 15x10 option.
Might have to see if I can borrow one to do a bit of testing.


Walmer Central Victoria
Began detecting 1979 Best colour 3Kgs Best patch 340 ozs.

3 users like this post: Northeast, Dingo, 10fp

#8

10fp
Member
From: Adelaide
Joined: 16 December 2015
Posts: 146
Member
20 March 2019 10:32 pm

19 EVO test session this evening , settings 103 GB
44/45
80
5
10 mode

for the 1 gram at 7 inches
and 3 gram at 10 inches
and clearly nulls the thresthold on the 3 oz at 19 inches

Now for the big deep targets boomed on the 3 oz at 19 inches and solid on the 2 oz at 23 inches ( note the GPX 4500 wilth 19 evo cant get the 2 oz at 23"in Enhance
went up to mode 12
settings 103
50
50
7
12
( note ,, you loose the 1 and 3 grammers on the big deep settings

Commander 11" coil prefered mode 6 with B 48
A 60

other coils to test next
14 x 9 EVO
17 x 11 Elite
15 x 12 Commander Mono

cheers Dave

Last edited by 10fp (20 March 2019 10:42 pm)


Sdc , 4500, NOX 800, QED

1 user likes this post: Mirrors

#9

Redfin
Member
Joined: 26 February 2013
Posts: 2,248
Member
21 March 2019 08:57 am

10fp wrote:

note the GPX 4500 wilth 19 evo cant get the 2 oz at 23"in Enhance


cheers Dave

Dave, your test with your machine may not have been positive, but I assure you my 4500 with a 17 x 11 Coiltek Elite in
Factory presets [and enhance] gave a definite "dig me" on the 4th target at the Coiltek test patch.
2oz @ 22".
Full results were published on this forum back in 2017.

PS: I'm not here to debate the QED, or caparisons between different machines.


Det used - Whites 6000D, ML SD2000, ML SD 2001, ML SD 2200D, Garrett Infinium. Minelab SDC 2300. Minelab GPZ 7000.
Current Det - Garrett ASD Groundhog. . Minelab GPX 5000. Minelab GPX 4500.

1 user likes this post: mbasko

#10

mbasko
Member
From: Central West NSW
Joined: 27 January 2015
Posts: 3,764
Member
21 March 2019 09:35 am

Redfin wrote:
10fp wrote:

note the GPX 4500 wilth 19 evo cant get the 2 oz at 23"in Enhance


cheers Dave

Dave, your test with your machine may not have been positive, but I assure you my 4500 with a 17 x 11 Coiltek Elite in
Factory presets [and enhance] gave a definite "dig me" on the 4th target at the Coiltek test patch.
2oz @ 22".
Full results were published on this forum back in 2017.

PS: I'm not here to debate the QED, or caparisons between different machines.

And I assume you could still pick up the 1 & 3 grammers in the same settings? thumbsup


Everything we use comes from mining or farming.

#11

Redfin
Member
Joined: 26 February 2013
Posts: 2,248
Member
21 March 2019 10:56 am

mbasko wrote:

And I assume you could still pick up the 1 & 3 grammers in the same settings? thumbsup

Must have been a different test patch, but with the above setting have picked up sub grammers @ 3"

Below is a screengrab of the original post, Target No.5 I have since found out is actually at 26"

1553126163_test.jpg

Sorry to go off topic, but felt it was so wrong.


Det used - Whites 6000D, ML SD2000, ML SD 2001, ML SD 2200D, Garrett Infinium. Minelab SDC 2300. Minelab GPZ 7000.
Current Det - Garrett ASD Groundhog. . Minelab GPX 5000. Minelab GPX 4500.

1 user likes this post: mbasko

#12

10fp
Member
From: Adelaide
Joined: 16 December 2015
Posts: 146
Member
21 March 2019 12:30 pm

all good mate , the coiltek test site Everybody gets fairly easy according to all video`s

this is in some Really Tough ground that even the 7000 with std coil cant get in difficult , but could get it with the 20"X coil

Redfin your 4th target is 2 oz at 20" , big difference to go another 3 inches in highly mineralised ground with charcoal

i made my test patch 1 inch deeper on the 1 and 3 gram targets
1 gram at 7 inches ( limit for the sdc )
3 gram at 10 inches
11 gram at 15 inches
3 oz at 19 inches ( way to easy )
2 oz at 23 inches . ( the tough one in my hot ground )

cheers dave

Last edited by 10fp (21 March 2019 12:45 pm)


Sdc , 4500, NOX 800, QED

#13

10fp
Member
From: Adelaide
Joined: 16 December 2015
Posts: 146
Member
21 March 2019 02:29 pm

14 x 9 EVO runs pretty well on mode 7 around th b 43
th b 42 in better ground
th a 60

Commander 11" runs well on mode 7 also very similar settings

walking around i tend to stay in GB mode so i can just keep adjusting on the fly up or down 2 or 3

Dave

Last edited by 10fp (21 March 2019 02:30 pm)


Sdc , 4500, NOX 800, QED

#14

travelergold
Member
Joined: 19 May 2015
Posts: 177
Member
21 March 2019 08:04 pm

Have seen and used the test patch that 10pf is talking about on his property. Very heavily mineralised. As tough a ground that you will find. Lots of hot rock and some charcoal but the ground is natural, not made up ground. Old timer gold diggings there. Was an 18" xcoil used for test purposes. Cheers TG

2 users like this post: 10fp, OzzieAu

Contact Us - Privacy Policy - Terms Of Service

View Desktop Site

Top