You are not logged in.

  • Register to access all forum features  

#1

Gregupnorth
Member
Joined: 18 May 2014
Posts: 109
Member
03 December 2018 12:28 pm

I have a lease in north Qld and the wash plant I have is loosing a fair bit of fines (flour stuff) going over the end of the sluice box.
What I would like to do is put a knelson concentrator on it.
So if any one has one or know of one for sale I would really like to here from you.

Greg cool

3 users like this post: Diggerman60, goody2shoes, Jaros

#2

Ward69
Member
Joined: 16 May 2018
Posts: 198
Member
03 December 2018 02:51 pm

how small are the fines, 100mesh 200mesh 300mesh - I have been playing around with this for about 12months with different sizes, found away to collect 1000mesh, in a small batch - its all about hydophobic.

#3

HeadsUp
Member
From: Sydney, NSW
Joined: 17 April 2013
Posts: 2,912
Member
03 December 2018 04:11 pm

Knelson would be too slow mate , they cant process the volume of cons you will get.

there is another way.

what size mesh are the screens , how many ton per hour in total through the plant and can you estimate what percentage of that would be < 3 mm in size ?


On a mission to rescue as many gold nuggets as i can before those poor souls get washed out to sea . GPX5000 smilemaker , self built highbanker and enthusiastic shovel

#4

Simmo
Member
Joined: 08 November 2014
Posts: 1,047
Member
03 December 2018 04:13 pm

I've got mine here Greg, its been a I'll fix it up one day project for years!


"The better part of valor is discretion."
Shakespeare

#5

Gregupnorth
Member
Joined: 18 May 2014
Posts: 109
Member
03 December 2018 05:05 pm

Thanks for to replies so far
Targeting 250 mesh and finer
Looking at to putting 10 tons per hour through the plant then screen it down to 3mm.
It will be close to about 50 percent or 5 ton will only go through the Knelson after screening
So a 12inch Knelson would handle it easy or a 20 inch and screen it down to 6mm
Simmo I thought you have a cyclone or nudson bowl type centrifuge anyway I will give you a ring soon mate.

Greg cool

1 user likes this post: Simmo

#6

dinger
Member
Joined: 29 March 2017
Posts: 28
Member
05 December 2018 06:22 pm

Hi Greg, Have sent pm with some info,it maybe helpful,Cheers.


Contact Us - Privacy Policy - Terms Of Service

View Desktop Site

Top