Quick build 'Blue Bowl'

Prospecting Australia

Help Support Prospecting Australia:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
This is one i made about a year ago work of the normal house tap
1484907625_101_60841.jpg

1484907646_101_60881.jpg

1484907682_101_60862.jpg
 
Hi Nightjar,
Just wanted to know how well the sluice works (and would it work for catching gems as well mainly sapphires) as it seems to be a lot different to what else is around but it would be easy to make with what I have lying around at home. And your bowl setup is different to what others have, water entering at the top and no raised middle section but your picture shows what looks to be a number of sapphires etc, left in the bowl. Just wondering as the site that I have access to has a lot of sapphires and a small amount of gold and the kids enjoy finding the stones and don't quiet have the patience to hunt for the gold specks just yet.

Nightjar said:
Both work well.

[.url=http://s151.photobucket.com/user/nightjar3/media/Goldpype007.jpg.html]
[.url=http://s151.photobucket.com/user/nightjar3/media/Goldpype008.jpg.html]

[.url=http://s151.photobucket.com/user/nightjar3/media/Goldpype013.jpg.html

[.url=http://s151.photobucket.com/user/nightjar3/media/Goldpype015.jpg.html]
 
Spiesy said:
Hi all, has anyone commented on roughing up the bowl with fine sandpaper or rubbing sand in by hand? All the plastic pans seem to have a matt finish to them and by roughing the base up would get a better 'grab' of the finer stuff.
I am definitely building one but I think I will use a black oil change type pan cause I am a little colour blind and need the contrast.
Great site and awesome builds
Cheers
i bought a genuine bb recently and their instuctions say specifically not to use abrasives on the bowl
 
I know this is a pretty old thread but is in the middle of making one of these myself and has come across most of the raw products that nearly match the diagram of the real product via bunnings

The bowl is a touch shorter but width is basic spot on and it is this one

ezy storage 30cm 4l round plastic basin

Now for the funnels again has come across a funnel that basic the same size which can be found in this set of 4. and that the 95mm and the 50mm (2 inches) one which you use both to reverse into each other. The angle is almost spot on the diagram of real blue bowl.

sandleford-4-piece-funnel-set

Just sharing just in case anyone is after the materials etc.
 
Well now you have gone and done it !!

Setting this to the side it came to my attention.

Being a big DIY fan, at 8.15pm on a Thursday night I picked up miss 13 from her work and headed to a $2 shop to gather parts.
Took all of 4min in the shop, LOL (including two balls of wool for miss 13)

I am taking up the "Blue Bowl Challenge". 😞

Total $8.50 in parts, the glue I already have in stock.

IMG_20220901_202619.jpg

IMG_20220901_202634.jpg

IMG_20220901_202647.jpg
 
I'm not into gold hunting/detecting, so what use do I have for a Blue Bowl ?
LOL, do I need to have a use ?

Actually I do,
3 years ago the family was in Ballarat at Sovereign Hill (where I suspect we all picked up the Corona Virus) and the girls had not finished panning some dirt from the tourist creek.
So as a good Father I dutifully collected the 'wet dirt' and put it into a takeaway container that came home with us along with a new puppy that the kids had no idea we were picking up from the breeder.
Said 'wet dirt' has been sitting on the kitchen counter now for 3 years. As a good Father I treasure the little things my children do. 😒

(Along with like 60,000,000 shells and rocks, sticks and scraps from anywhere and everywhere)


IMG_20220902_104152.jpg


IMG_20220902_104750.jpg IMG_20220902_104734.jpg


Back to the Blue Bowl... Saturdays task for my kids is to assemble the apparatus, as to the 'plans', learn how to use it, and process the take away container.... AT LAST 🥳

I reckon it will be good test material because I know there is fine gold in there, you can see it on the bottom of the container.

So what happened to the puppy ? Did it sit around on the kitchen counter too ?

Pics to follow
 
Golden rule of metallurgists , classify before separating . That is screen your material . You cannot mix up 2m.m. with say 6 m.m . A heavy piece of 2m.m. will be the same as a lighter 6m.m. piece . Savvy ???
 
try you tube dust to dust ,vids on there to watch,
they are a good investment if you have a reasonable amount of #20 AND #30 mesh size to pan ,the only problem i have with it is after about 4 to 5 hours of keeping a eye on it i tend to get a bit wobbly ,not sure if it's from watching the water spin in a circle or the amount of square bear that is consumed ,i will stay with the water theory :rolleyes:
 
Thanks Sand & Surf , whilst i have been a member for a few years, I'm the only one in my tribe that has any inclination to do any prospecting or fossicking. I am due to retire in the next 12 months and would really love to catch the gold fever, here is step one, thanks for your help !
 
As promised, here's how to wack together a copy of a 'Blue Bowl'.
For under $12!!

Bunnings was my prospector supplies store today!
A bowl, $4.50, funnel $1.98, three way hose adaptor $5.50.

1365817721_p4130007.jpg


The bowl is quite big, and comes in differant colours, I chose 'Garrett Green' ;)

1365817799_p4130014.jpg


The first thing to do is block up one of the holes in the three way fitting with silastic. (note the adapter I bought has one inch fitting, this is not necessary, it was just 50c cheaper than the three way half inch one!!)

1365817911_p4130008.jpg


Then whilst thats drying, cut the bottom out of the bowl with a grinder.

1365817964_p4130009.jpg


Then cut the spout off the funnel, to give about a 3 inch hole.

1365818020_p4130010.jpg


Now centre the funnell and glue to the bucket.

1365818068_p4130011.jpg


Now you will need a hole saw to cut a 20mm hole in the bowl, about 25mm from the base.

1365818224_p4130012.jpg


OK, now glue the three way fitting in place, with the blocked hole on the inside!! Slightly angle the open hole, downwards.
note here, I stuffed up and was a little rough on the bowl, and cracked it. I have since had a look at my one I built ages ago and the plastic is much stronger than this bowl, even though they are the same. Anyway, it wont affect operation, so I just glued it up.

1365818396_p4130013.jpg


Now get some silastic around the join of the funnel and bowl from the underside.

1365818458_p4130016.jpg


Let the silastic go off and test!!

1365818495_p4130017.jpg


There are plenty of vids on u-toob to show you how to use one, but what I do is put the hose on and fill so the water is just overflowing.
Turn water off, add detergent, add cons, turn water on slowly.
The fines should just start to move.
Turn water up unti you have a definate swirl happening, you will begin to see a fine spiral line of black sand going up the side of the funnel and out.
The fines in the bottom of the bowl will start to form a star shape around the funnel.
I then turn up the water quite high, but not as high to let the water go over the sides of the bowl.
After maybe 5 or 10 minutes, your front lawn will be satisfactorily watered, and you will have just gold, and fine gold too, left in the bowl.
Turn water off, remove hose, and pour into a pan...simple eh?
Interesting, i ll try to make one. Thx for sharing
 
I would add a reservoir beneath it and a decent size electric pump along with a ball valve to control the water flow. Instead of leaving the hose on. You've done most of the job, you would just need the a slightly larger container beneath, an aquarium pump would do with high rate of flow and a ball valve literally. Plumbing is all done. Really brilliant regardless of minor upgrade suggestions and you're saving people money for sure. Can't believe these sell for like $250 give or take.
 
Top