Whites GMT falsing / bad leed connection

Prospecting Australia

Help Support Prospecting Australia:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jul 7, 2015
Messages
497
Reaction score
285
Hi, im finding it very very hard to use my GMT ,tried tighter wrapping around stem but no matter what i do it falses at the end of each swing left and right, annoying as , i think its where it plugs into the control unit thats bad
 
Try leaving the coil connected and remove the coil from the shaft and put your foot gently on the cable near the control box and swing just the coil by hand and then put the coil down keeping your foot on the cable and wiggle the cable near the control box and see which method cause's a response from the machine, Hope this helps, Ok

John
 
Top