You are not logged in.

  • Register to access all forum features  

#1

AngerManagement
Repairs + X-pointers
From: 4030, QLD
Joined: 31 August 2014
Posts: 976
Repairs + X-pointers
27 October 2015 01:29 am

* Deteknix Diver not affected.

It has come to my attention, that some units can suffer from water ingress via the speaker.

This is only a problem, when the unit is being used fully submerged....

Should fine dirt / shell grit etc get into the speaker area OR if you attempt to clean the speaker with a tool/tooth brush etc.

Then there is a strong chance; that the water proof audio membrane can be breached!

NOTE: If you do get moisture in the unit. Turn it off and remove the battery and contact me ASAP.

User resolution:

A: Contact me to arrange return details, and I will implement a formal fix.

OR

B: Quality tape over the speaker - not electrical; but a vulcanising tape. Stretch, so that it is thin enough to allow sound to penetrate, and at least two wraps. To ensure the tape is bonded nicely,

OR

C: If you believe you have the skills to perform a slightly more detailed fix; Contact me for detailed instructions / guidance. A simple and effective fix, that most should be able to perform, without special tools.

Once again, I stress that the Deteknix Diver is in NO way affected, as it has a different speaker configuration.

* An email with this information was sent out via my web shop; however not all of those that may have purchased, did so via the shop.

Last edited by AngerManagement (27 October 2015 01:34 am)


Best find - The Wife # Equipment - X-Pointer x 4, Nokta Fors Gold Plus, Excalibur II, CTX3030 and a Minore III with custom wood - and lots of other stuff

1 user likes this post: TheSilentBugler

#2

AngerManagement
Repairs + X-pointers
From: 4030, QLD
Joined: 31 August 2014
Posts: 976
Repairs + X-pointers
27 October 2015 01:39 pm

Hi All

I have been doing my best to contact those that have obtained a Wader or Wader Li from me. However; for many reasons - I have not been able to contact all users and many have not responded.

Email and or contact details not 100% correct or out in the field detecting... Well I hope that is where they are :-)

Too ensure their pointers can remain protected - I have provided a document for them to follow. This should ensure that for all those that do not wish to return their units to me. That the possible breach to the speaker membrane, is able to be managed.

Please share with any Deteknix Wader and or Wader Li users that you know.

https://drive.google.com/file/d/0B3tQoi … sp=sharing

So while a few may comment - I am mad to make it public....

I would rather have trust with my customers and any, that then wish to buy something else, is their choice.

My word / ethics / morals = I have to do something, if I feel and have experienced an issue that compromises the functionality of the product..


Best find - The Wife # Equipment - X-Pointer x 4, Nokta Fors Gold Plus, Excalibur II, CTX3030 and a Minore III with custom wood - and lots of other stuff

1 user likes this post: TheSilentBugler

Contact Us - Privacy Policy - Terms Of Service

View Desktop Site

Top