- Joined
- Jul 20, 2016
- Messages
- 2,274
- Reaction score
- 2,271
G'day fella's, I know some of this was covered in another thread, however, I didn't want to hijack that one any further so here is a fresh on topic one.
I did a vid of what my plans were. Basically, I want to be able to remove the controller after 4wd trips to use it for a solar controller on the deck at home. If it turns out all the extra connections are not so much of a great idea, I'll just get a mppt controller for the solar at home (currently just a crap pwm).
I use that to charge all my deep cycles that I use for the bilge pump which runs the highbanker.
Anyway let me know what you think of my setup and any ideas that you may have that would improve it.
[video=480,360]https://www.youtube.com/watch?v=f4BOFeyLSy8[/video]
BTW my current uses are just a fridge when on trips and a bit of led lighting, no inverter or heavy current devices.
I did a vid of what my plans were. Basically, I want to be able to remove the controller after 4wd trips to use it for a solar controller on the deck at home. If it turns out all the extra connections are not so much of a great idea, I'll just get a mppt controller for the solar at home (currently just a crap pwm).
I use that to charge all my deep cycles that I use for the bilge pump which runs the highbanker.
Anyway let me know what you think of my setup and any ideas that you may have that would improve it.
[video=480,360]https://www.youtube.com/watch?v=f4BOFeyLSy8[/video]
BTW my current uses are just a fridge when on trips and a bit of led lighting, no inverter or heavy current devices.