Today I MADE

Prospecting Australia

Help Support Prospecting Australia:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
With the upside down water trap,

Obtain some round type material and paint it red.
Then put it inside.
Now that would look pretty cool.
And disguise it. :)

Sandbagger said:
One completed inspection panel on the port side of the Viper's engine nacelles, made out of scrap ply and some timbers from my demolished pergola. The thing that strikes me humorous is the air filter/water trap that is not only installed upside down, but probably wouldn't work in zero G anyway. Still, it looks cool. I think I've got it pretty close, considering the limited materials and detailed photos I have at my disposal.

https://i.imgur.com/RyvxZYP.jpg?1

https://i.imgur.com/d6fGMKS.jpg?1

https://i.imgur.com/GBE2ZZG.jpg
Click to expand...
 
Detector Stand, for when I get into trouble for putting it on the table, & don't want to kneel on the ground while fiddling, attaching bits, tuning (SD) etc.
not quiet up there with Sandbaggers awesome work :playful:
made from all pvc/plastic. some joints aren't glued so it packs into a bag or box.
This is just a prototype to play with ideas. Any/all constructive criticisms welcome :p
1550283687_holder_qtr_side_view.jpg

1550283710_front_holder_side_view.jpg

1550283735_rear_holder_qtr_side_view.jpg
1550283776_holder_breakdown_2.jpg
 
Looking the goods Ded Driver :Y: and if it does the job you want it to do well I think its perfect :perfect:
Although I will say with a few more flash bits and pieces mounted on the underside I recon that you could get it walking behind you? :playful:
 
Jaros said:
Where's the drink holder and phone clip.
Click to expand...
.
absolutely SPOT ON Jaros .... Built-In stubby holder ..a 'must have' item that I overlooked :beer: :beer: :Y:
....but I don't carry my phone around with the detector so no need for the clip :N:

and LiWi, I reckon I need to get Sandbagger onboard for the walker bit ... star wars style :D

I need to find a better quality plastic box. I reckon that flimsy PP one will go to :poop: with a good dose of UV
Its not glued, but clamped down with a piece of 2mm MDF & 8mm nylon bolts
 
Today I made, well not quite, still a work in progress.
You'll have to guess the answer.
A clue, I'm 15 deep
 

Similar threads

mbasko
  • Locked
  • Sticky
📢 Become a Site Sponsor
Replies
0
Views
1M
mbasko
mbasko
Jezzau
Homemade highbanker made from Gold rat river sluice
Replies
0
Views
162
Jezzau
Jezzau
U
Today I finished.
Replies
1
Views
552
Mackka
Mackka
mbasko
  • Locked
  • Sticky
🌞 Today I...... threads
Replies
0
Views
1K
mbasko
mbasko
K
New Member
Replies
5
Views
299
Nap.in.Cbr
N

Latest posts

Top