Today I MADE

Prospecting Australia

Help Support Prospecting Australia:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
goody2shoes said:
Plough disc ....its not a easy thing to get..

Went and seen some local farmers, they don't have any,

One said most people turn them into BBQ plates,

Went to 3 Engineering places and they had none,

But told me the same old story the farmers told me,

At lease I am trying to give it a go,

Goody
the local farm machinery supply will sell em singly, not too expensive :cool:
 
Its Royal pain in the ......

Eldorado' sounds like we up the same creek with out a paddle :) :) :)

At lease we are trying ...

Goody ;)
 
I came across a old hoe that a very old bloke made for me

In the shed behind a lot of other stuff,

Would have to be 30 years old by now,

I'm going to take the angle grinder and sharpen up one end of it,

Reshape the other end,

There you go I have turn something that I don't use all that much into my new pick....plus it will be kind of light weight for me to use,

A lick of black paint, and it will look the part, :pickshovel:

Find some of my old screwdrivers and do kind of the same to them.

Will have the tools to get that gold out of the tight spots, :goldnugget:

Not to bad I say for a old women :) :) :)

Goody

:goldpan:
 
Well i didnt make anything but resprayed the diff out of my fx,bogan shed job......
1537606633_a05aff2d-11f8-4072-97b8-38834a9316bd.jpg
 
Yep golds allways on the bottom :D
Had to replace the pinion seal,so all seals then sandblast,it was a show car in the early 80s and still looks good so no choice but to do it properly but every seal or bit of rubber on the old girls showing its age,so starting at the back and working foward,all 2 pac paint underneath but its just a cruza from time to time now so im just gonna rattle can acrylic the best i can on any bits underneath that get worked on.....
1537610824_efc4f2b2-a64b-4193-88d9-2efb346a413e.jpg
 
Gday all was mucking around in my shed and knocked up a miller table seems to work ok put some shotgun pellets through it then some tiny bits of gold mixed in with sand they all stuck basically were I dropped the mix so should be ok I used some thin rubber for the surface of the table and a 12volt bilge pump cheers Muk.
1537698668_068e21d1-9f92-4483-9bc0-607efa9013e0.jpg

1537698669_4764d942-ae3c-4944-952b-62bc220b0c7f.jpg
 
Goldchaser1 said:
Yep golds allways on the bottom :D
Had to replace the pinion seal,so all seals then sandblast,it was a show car in the early 80s and still looks good so no choice but to do it properly but every seal or bit of rubber on the old girls showing its age,so starting at the back and working foward,all 2 pac paint underneath but its just a cruza from time to time now so im just gonna rattle can acrylic the best i can on any bits underneath that get worked on.....
https://www.prospectingaustralia.co...0824_efc4f2b2-a64b-4193-88d9-2efb346a413e.jpg

Struth Dave,

That doesn't look like your shed. ;)

Cheers

Doug
 
Gday all had some spare time today so decided to cut up a couple of the ag points I scored into rough blanks for picks got quite a few out of them will do the final shape and sharpen on my works linnesher I will have some fore sale if anyone is interested they wont be very pricey thinking I might rock up at the lannecorrie bash with them if thats aloud I also have made some silly pots any way have a look at the blanks wont look like this shortly cheers Muk.
1538297511_c80f4b92-c446-4f8c-ad3c-ab60ab8963a6.jpg

1538297512_864e9414-5b8c-4319-b0ae-98162e87ad3c.jpg
 

Latest posts

Top